My Quote

You have no items in your quote cart.

Toll Free: 800.234.1492 | Local: 713.748.0200

6333 Sidney St. Houston, TX 77021 | M - F 8:00am - 5:00pm CST

Musson Rubber Company Stair Treads & Commerical Flooring Supplier

per page
Set Descending Direction
  1. Dimensions

    Mat Recess Frame (#0108)

    $0.00
    • Made of extruded 6063 aluminum alloy and are fabricated to exact dimensions to insure fit to the mat.
    • Frames are supplied with mitered corners and shipped unassembled with all necessary anchor keys and corner pins.
    • Frames must be assembled at the job site and installed so that upper edge is level with finished floor surface.
    • The frame should be anchored into cement with anchor keys a minimum of 24" on centers.
    • Corner pins should be installed at all corners of frame.
    • For use on mats of 3/8" - 5/8" thickness
    • "Dimensions" are inside frame dimensions.

  2. Velva Tiles

    Velva Tiles (#0110)

    Starting at: $0.00

    • This is a unique floor covering in tile and strip form manufactured from recycled strips of industrial tire carcasses.
    • The walking surface of the strips is chenille and vulcanized to a flexible backing. It is tough, non-absorbing, high wear flooring for use indoor or outdoor, in public buildings, schools, ramps, locker rooms, or entrances.
    • May be vacuumed. Use mild detergent and stiff brush to clean heavily soiled areas.
    • Use our environmentally friendly adhesive to bond tiles to floor.
    • Adhesive covers approximately 100 square feet per gallon.

  3. Tile Lock Rubber Gym Tiles

    Tile Lock Rubber Gym Tiles (#0117)

    Starting at: $0.00

    • High shock absorbency and long wearing toughness make tile lock rubber gym tiles the popular choice for all types of athletic facilities.
    • Interlocking tiles are simple to install and accommodate most areas.
    • Pebble textured surface pattern provides sure footing.
    • Protects floor from skate blades and free weights.
    • Tiles can be custom cut on site.
    • 7/16" thick

  4. #100 Epoxy Nose Caulk

    #110 Epoxy Nose Caulk (#0501-110)

    $0.00
    • Epoxy nose caulk should be used on all stair treads installations.
    • It is necessary when Adjusta-Nose treads are being installed or when the step nosing is worn, broken or rounded.
    • This two part epoxy will fill voids at the nose and give needed support underneath the stair tread nosing.
    • Can also be used to repair surface of step.
    • Available in quart units.

  5. #300 Water Based Contact Adhesive

    #300 Water Based Contact Adhesive (#0501-300)

    $0.00
    • A water based contact adhesive for bonding rubber and vinyl stair treads and risers to concrete, wood, terrazzo, metal or marble.
    • Brush on both surfaces
    • Installs approximately 75 feet of treads per gallon.
    • Available in quart or gallon cans.

  6. Light Duty Vinyl Stair Treads

    Light Duty Vinyl Stair Treads (#0501 355)

    Starting at: $0.00

    • Light duty stairwell tread.
    • Lower initial cost tread designed for multi-family dwellings, apartment houses and light residential applications.
    • Flat rib surface is easy to clean.
    • Meets Fed. Spec. RR-T-650E Type B.
    • 1/8" thick, 12" deep, 1 3/4" long square nose.
    • Contains no asbestos fiber, made of first quality homogeneous vinyl, color throughout.
    • Square nose only

  7. Medium Duty Vinyl Stair Treads

    Medium Duty Vinyl Stair Treads (#0501 375)

    Starting at: $0.00

    • Medium duty stair tread.
    • This tread was designed for use in apartment projects and light commercial applications. 
    • Lower initial cost, ease of installation, ease of cleaning and long service appeals to apartment owners and builders.
    • Extra thick at the front, Meets Fed. Spec. RR-T-650E Type B.
    • 3/16" thick, 12" deep, 1 1/4" square or curved nose.
    • Contains no asbestos fiber, made of first quality homogeneous vinyl, color throughout.
    • Specify either square or curved nose.

  8. Heavy Duty Vinyl Stair Treads

    Heavy Duty Vinyl Stair Treads (#0501 400)

    Starting at: $0.00

    • Heavy gauge sharp-rib design koroseal vinyl tread for your heaviest traffic. 
    • 1/4" thick at the wear area.
    • Meets Fed. Spec. RR-T-650E Type B.
    • 1/4" thick, 12" deep.
    • Contains no asbestos fiber, made of first quality vinyl color throughout.
    • Square nose only.

  9. Vinyl Cove Stair Risers

    Vinyl Cove Stair Risers (#0501 405CR)

    Starting at: $0.00

    • Solid color cove risers match our vinyl stair treads.
    • Easy to trim in height and length.
    • Risers are the same length as the stair treads.
    • 1/8" thick, 7" high with a 5/8" toe.
    • Ribbed back for better adhesion.
    • Available in Black, Brown, Gray, or Sand.

  10. Rubber Cover Stair Risers

    Rubber Cove Stair Risers (#0501 505CR)

    Starting at: $0.00

    • Same colors as our rubber stair treads.
    • Easy to trim in height and length.
    • Risers are the same length as the stair treads.
    • 1/8" thick, 7" high with a 5/8" toe.

  11. #560 Rubber Flooring Adhesive

    #560 Rubber Flooring Adhesive (#0501-560)

    $0.00
    • A latex adhesive for installation of rubber flooring or tiles over suspended wood or suspended concrete floors and over suitable on grade concrete floors.
    • May be used with rubber stair treads.
    • Where excessive moisture exist, installation is not recommended.
    • Environmentally friendly.
    • Covers approximately 150 square feet per gallon, single coat.
    • Available in gallon can or 4 gallon pail.

  12. Diamond Design Rubber Stair Treads

    Diamond Design Rubber Stair Treads (#0501 622)

    Starting at: $0.00

    • The original diamond design molded rubber stair tread, half diamond design, half smooth, with a longer adjustable nose.
    • Designed to fit pan filled, molded concrete, or terrazzo steps.
    • For use in commercial, industrial or institutional buildings.
    • Diamond design surface is 6" deep, covers the impact area of pedestrian traffic.
    • Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)
    • Full 1/4" thickness at the nose,12 1/4" depth and a 1 1/4" deep inside nose.
    • Contains no asbestos fiber and the color extends throughout the thickness of the tread.
    • Available in either square or curved nose.
    • Curved nose available in Series I colors only.
    • Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
    • Strips are available in black, beige, brown, gray, red or yellow.

  13. Diamond Design Rubber Tile

    Diamond Design Rubber Tile (#0501 624)

    Starting at: $0.00

    • Diamond design tile is ideal for stair landings, lobbies, aisles, ramps, elevators or entryways.
    • Diamond design pattern matches diamond design stair treads.
    • For use in commercial, industrial or institutional buildings.
    • 7/32" thick, 24" x 24" factory cut tile.
    • Contains no asbestos fiber and the color extends throughout the thickness of the tread.
    • Select standard color from Series I, II, or III.

  14. Outdoor Recycled Rubber Stair Tread

    Outdoor Recycled Rubber Stair Tread (#0501 633)

    Starting at: $0.00

    • Outdoor Recycled Rubber Stair Tread is an excellent tread for exterior applications.
    • Made from 100% recycled tires.
    • Diamond design surface is 9" deep with a 3" smooth back border.
    • Full 1/4" thickness at the nose, 12 1/4" depth and a 1 1/4" deep inside nose.
    • Available in square nose only.

  15. #775 Epoxy Flooring Adhesive

    #775 Epoxy Flooring Adhesive (#0501-775)

    $0.00
    • A two part epoxy adhesive for installation of Disc-O-Tile and Disc-O-Tread.
    • It is the only recommended adhesive for below grade flooring installation.
    • Each unit contains a Part "A" and Part "B" packed in one gallon cans to be mixed to produce one gallon of adhesive.
    • One unit will cover approximately 150 square feet.
    • Environmentally friendly.
    • Available in one gallon kit.

  16. Disco-O-Tread Rubber Stair Treads

    Disc-O Tread Rubber Stair Treads (#0501 787)

    Starting at: $0.00

    • New design Adjusta-Nose tread easily adjust to steps with angle between 90o and 60o.
    • Ideal for public buildings where fire safety is a prime concern.
    • For use in commercial, industrial or institutional buildings.
    • Circular disc, 3/4" diameter, are easy to clean and affords for safer pedestrian traffic.
    • Meets Fed. Spec. RR-T-650E.
    • Flame spread rating of 25 or less using ASTM-E-84 test.
    • Full 1/4" thickness at the nose, 12 1/2" depth and a 1 7/8" deep inside nose, smooth rear border is 3" deep.
    • Contains no asbestos fiber and the color extends throughout the thickness of the tread.
    • Available in standard solid color from Color Series III only.
    • Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
    • Strips are available in black, beige, brown, gray, red or yellow.

  17. Disco-O-Tile Rubber Tile

    Disc-O-Tile Rubber Tile (#0501 788)

    Starting at: $0.00

    • Unique floor tile with raised circular disc, 3/4" diameter, for better traction.
    • Circular pattern matches DISCO-O-TREAD stair treads.
    • Factory cut 24" x 24" square tiles for fewer joints and quicker installation.
    • For use in commercial, industrial or institutional buildings.
    • 3/16" thick.
    • Contains no asbestos fiber and the color extends throughout the thickness of the tread.
    • Flame spread rating of 25 or less using ASTM-E-84 test.
    • Select standard color from Series III.

  18. Lo-Disc Design Rubber Stair Treads

    Lo-Disc Design Rubber Stair Treads (#0501 800)

    Starting at: $0.00

    • Our LO-DISC tread has the popular round disc design, but in a lighter gauge stair tread.
    • Treads have tapered 3/4" disc, raised .025".
    • Excellent for lighter traffic stairways.
    • Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)
    • Flame spread rating of 75 or less using ASTM-E-84 test.
    • Full 3/16" thickness at the nose, 12 1/4" depth and a 1 1/2" deep inside nose.
    • Contains no asbestos fiber and the color extends throughout the thickness of the tread.
    • Available in square nose only.
    • Select standard color from Color Series I, II, or III.
    • Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
    • Strips are available in black, beige, brown, gray, red or yellow.

  19. Lo-Disc Design Rubber Tile

    Lo-Disc Design Rubber Tile (#0501 888)

    Starting at: $0.00

    • LO-DISC design tile matches #0501-800 LO-DISC treads for use on landings.
    • 3/4" diameter disc, raised .025" for easier cleaning and gives a safer surface for pedestrian traffic than smooth tiles.
    • Meets Fed. Specs. SS-T-312B.
    • 1/8" thick, 24" x 24" factory cut tile.
    • Contains no asbestos fiber and the color extends throughout the thickness of the tread.
    • Select standard color from Series I, II, or III.

19 Item(s)