Marine Floor Mats
Marine Floor Mats
Marine Floor Mats
Marine floor mats from Mats Inc. are more than just a functional addition to your boat; they are an investment in safety, durability, and comfort. These mats provide excellent traction, even when wet, and significantly reduce the risk of slips and falls on the deck.
Made with the toughest materials, our rubber boat flooring resists corrosion from saltwater and prevents physical damage to your boat's flooring. This flooring is also easy to clean, enhancing cleanliness aboard your vessel.
Our marine mats have rubber that can stretch and compress to ease the strain of standing for extended durations. In addition, they provide a low-priced, long-lasting, and simple-to-setup flooring option.
With Mats Inc., you are choosing more than just a product; you are choosing a partner that’s dedicated to delivering safety and comfort for your marine adventures. Invest in our marine floor mats today—because your safety matters to us.
-
Smooth Marbleized Vinyl Switchboard Matting (Mil Spec)- A smooth surface, high voltage insulating vinyl floor covering designed to protect personnel from accidental exposure to electrical potentials not exceeding 3000 volts.
- Conforms to MIL-DTL-15562G (FORMALLY MIL-M-15562F), TYPE I.
- Dielectric Test Voltage -30,000 VAC.
- Proof Tested Over Entire Surface at -15,000 VAC.
- Recommended Maximum Use Voltage -3,000 VAC.
- Marbelized colors.
-
Safety Track Non-Skid Tape - Coarse- This material fits your specific needs, in assorted shapes and sizes.
- Assists in preventing costly slip and fall accidents and helps in complying with strict OSHA safety standards.
- This material can be used indoors or out, wet or dry, even around oil and grease.
- It goes on like tape to a clean, dry surface and is ready for immediate service.
-
WP-70 Non-Skid Epoxy Coating- Trowel on, 2 part epoxy system for extreme, durable, long lasting solution.
- For industries, such as breweries, canneries, or off-shore drilling platforms.
- Extra thick consistency requires trowel and squeegee application.
- Packed 1 gallon kit per case.
- 25 - 30 square feet coverage per gallon.
- No flash or volatile solvents, low voc.
- 18 - 24 hour cure time.
- 30 - 60 minute pot life once mixed.
- Squeegee and mixing blade not included.
-
Oil Trap Absorbent Mat Pads with Tray- Oil trap absorbant mat pads and tray combine absorption with mid-range abrasion resistance to trap grime from boots and wheel trucks.
- 100% recycled post-consumer fibers soak up oils, coolants, solvents, and water.
- Abrasion-resistant qualities make it ideal for areas with moderate foot traffic.
- Excellant for walkways into offices and other finished areas.
- Includes reusalbe nitrile rubber tray and 12 disposable pads.
-
Dri-Dek Interlocking TilesStarting at $10.45
- 12" x 12" interlocking modular tiles for those areas where safety and comfort are critical.
- Open design allows water and debris to fall through the tile and out the drain.
- Tiles snap quickly together and can be easily trimmed to fit wall to wall applications.
- Perfect for showers, saunas, locker rooms, or any work station.
- Contains Oxy-B1 vinyl to inhibit growth of mold, mildew, and bacteria.
-
Wide Rib Vinyl Matting- Same popular design as our standard corrugated rubber matting, but at a very economical price.
- Quiets noise, saves floors in wet or dry weather.
- Most widely used where floor protection and safety are vitally important.
- Easy to clean.
-
Rely-On Olefin Matting- Hard wearing 100% continuous filament Olefin pile takes heavy traffic without fuzzing or pilling.
- Colorfast, even in direct sunlight.
- Traps one gallon of water per square yard.
- Easy to clean - just vacuum or hose.
- Backed with solid vinyl for even greater protection.
-
Safety Step Rubber MatsStarting at $101.00
- Low cost, high value mat for any industrial application.
- Anti-fatigue mat withstands wet environments.
- Modular design allows for custom installation.
- Beveled edges and corners are available.
- Molded in connectors on two adjoining sides.
- Mats are available with holes for drainage application.
- 1/2" thick
-
Grit Top Cushion Tile- For maximum traction, use our grit top tile.
- The carbide grit provides maximum traction in areas where oil, water, solvents or chemicals are found.
- Made from 100% recycled PVC.
- Bevel edges and corner pieces are available in black or safety yellow.
- Bevel edges and corners are not grit coated.
- 3/4" thick.
- Same waffle grid design as our standard cushion tiles, #0616.
- See #0616 for drainage version or #0616S for solid version.
-
Heronair Vinyl Matting- Superior slip resistance, anti-fatigue properties and lower cost makes this the mat of choice where duckboard is not necessary.
- The hollow ribs provide comfort underfoot.
- Provides excellent comfort & insulation where cold, hard floors are otherwise an issue.
- 1/4" thick.
- Sold in 40' rolls only.
-
Safe Walk Jr. Rubber Mats- Finally, a mat with all the features that you need. Lightweight, comfortable and built-in beveled edges.
- Safe Walk Jr. has holes for drainage.
- For use in machine shops, plants, factories or in the kitchen.
- This mat is formulated with grease resistant properties for years of service.
- Available in general purpose black, grease resistant red, or black with a grit coated surface for enhanced traction.
- 1/2" thick.
-
Cushion Tile- Cushion tile is the functional solution to the elimination of fatigue, vibration and slipping.
- The mat is made of durable vinyl plastic and is easy to install and custom cut to fit.
- Made from 100% recycled PVC material.
- Black or yellow ramped edges are available with the same interlocking mechanism.
- Resistant to most chemicals.
- Can be used in industrial plants, machine shops, exercise rooms, health clubs, swimming pools, hot tubs, saunas and in boats.
- 3/4" thickness.
- See #0616S for solid version or #0616G for grit top version.
Marine
Marine floor mats from Mats Inc. are more than just a functional addition to your boat; they are an investment in safety, durability, and comfort. These mats provide excellent traction, even when wet, and significantly reduce the risk of slips and falls on the deck.
Made with the toughest materials, our rubber boat flooring resists corrosion from saltwater and prevents physical damage to your boat's flooring. This flooring is also easy to clean, enhancing cleanliness aboard your vessel.
Our marine mats have rubber that can stretch and compress to ease the strain of standing for extended durations. In addition, they provide a low-priced, long-lasting, and simple-to-setup flooring option.
With Mats Inc., you are choosing more than just a product; you are choosing a partner that’s dedicated to delivering safety and comfort for your marine adventures. Invest in our marine floor mats today—because your safety matters to us.