Church Door & Floor Mats
Mats, Inc. provides an assortment of mats & matting used for church entrances, offices, kitchens & community centers.
Custom Logo & Personalized Mats
These mats are created with your one-of-a-kind logo, symbol and/or name imprinted on mat. Churches personalize mats with the imprint of their name or logo using their church’s colors. Sometimes, they quote a short Scripture or phrase that encourages fellowship or depicts their basic mission statement.
- #75 Classic Impression Logo Mat – Interior
- #0227 Berber Inlay Logo Mat – Interior
- #3559 Super Scrape Impression Logo Mat – Exterior
- #0105 Vinyl Link Mat – Exterior or Interior, Surface Mounted or Recessed
Interior Mats & Runners
These mats are plain mats (no logos), typically used inside the main entrance of church buildings to keep tracked in dirt & moisture to a minimum. Interior mats and runners are also used in covered parking garages & in front of elevators. These walk off mats come in many sizes, colors & designs. Some mats have a gripper or foam back specifically designed to stay in place on top of carpet.
- #0303 Wonder-Pro Olefin Mats & Matting
- #0311 Cross-Over Mats & Matting
- #105 Tri-Grip Nylon Carpet Mats – gripper back used on top of carpet
- #200 Waterhog Classic Mat
Exterior Mats, Runners & Coating
These mats are typically located in the exterior areas on church grounds. Exterior walk off mats are placed outside of entrances and are usually made of rubber or some type of plastic scraper material. These matting materials are designed to drain and dry quickly. They give parishioners and congregations the opportunity to scrape their shoes before entering church facilities.
- #0310 Fore-Runner Mats & Matting
- #385 Brush Hog Plus Mat
- #265 Wayfarer Mat (backed)
- #400 Safety Scrape Rubber Mat
Desk Chair Mats
Church Offices may choose to purchase custom-sized desk chair mats to protect floors and carpet from scratches & damage due to the caster wheels on desk chairs. Our desk chair mats are thicker & heavier duty than those typically found at local office supply stores.
Rubber Runners
These mats are typically used on slippery areas in church facilities or on church grounds. The corrugated surface helps to deter slips & falls. Corrugated rubber is often glued or adhered to wheel chair ramps to provide some resistance during use. In addition, Mats Inc. offers self-adhesive anti-slip tapes & coatings used on steps & in parking lots or garages.
Vinyl Runners
Mats, Inc. provides economical vinyl mats & runners often used to protect church gym floors or walkways from scratches caused by chairs or pedestrian traffic. In addition, Mats, Inc. offers a clear vinyl carpet protector used in areas where heavy carpet traffic results in a dirt or wear path on carpet.
Anti-Fatigue Mats & Runners (with holes)
For safety purposes, most churches purchase drainage mats for their kitchen areas. These mats also provide foot & leg relief for anyone required to stand for long periods of time.
- #0611 Multi-Mat II Rubber Matting
- #0622 Safety Step Rubber Mat – w/holes
- #0623 Safe Walk Mat
- #0624 Safe Walk Jr Rubber Mat
Stair Treads, Risers, Landing Tiles & Adhesives
Mats, Inc. offers rubber, vinyl & metal stair treads / step coverings for church facility stairways & stairwells. We have an extensive line of commercial stair treads / stair covers designed for light, medium & heavy traffic in an array of colors & patterns. Stair Treads with Grit Strips for the visually impaired can also be provided. Many of our treads have matching stair risers & landing materials.
-
Vinyl Link Mat (#0105)
Starting at: $0.00
- Superb shoe cleaning properties that reduce building maintenance.
- High grade PVC links are 1/2" wide x 7/16" thick x 1 7/8" long.
- Mat first removes dirt, then contains it deep within corrugations.
- Note: Not recommended where heavy equipment will be rolled over mats.
- Available with bevel edging for surface mounting or square edging for recessed applications.
- Custom logos can be incorporated into the mat.
-
Corrugated Rubber Matting (#0201)
Starting at: $0.00
- Runner matting for heavy traffic areas, where non-slip, high traction features are required.
- Quiets noise, saves floors in wet or dry weather.
- Most widely used where floor protection and safety are vitally important.
- Easy to clean, won't curl.
- This matting can be handled more easily under cold conditions than can vinyl.
-
Corrugated Vinyl Matting (#0203A)
Starting at: $0.00
- Same popular design as our standard corrugated rubber matting, but at a very economical price.
- Quiets noise, saves floors in wet or dry weather.
- Most widely used where floor protection and safety are vitally important.
- Easy to clean.
-
Clear Vinyl Matting (#0207)
$0.00- Clear runner matting with tiny "grippers" on the reverse side holds it securely in place, yet won't damage your carpet.
- It is transparent to let carpet beauty show through.
- Handsome surface pattern makes it easy to clean.
- Tapered borders along both edges lay flat to reduce tripping hazards to a minimum.
-
Berber Matting (#0227)
Starting at: $0.00
- This material is ideal for any type of entrance area, indoors and out.
- Berber is impervious to ultra-violet light and can be cut into any size or shape without danger of the edges unraveling.
- Berber is tough as steel, but looks like carpet.
- Can be direct glued down or made into custom size mats with edging applied to all sides.
- Corporate logo or design can be added for a custom look.
- Email us your artwork for free proof and quote.
-
Wonder-Pro Olefin Matting (#0303)
Starting at: $0.00
- This mat features 17 ounces of 3300 denier, continuous filament Olefin yarn per square yard.
- Absorbs moisture and dries quickly.
- 100% Olefin solution-dyed yarns maintain eye catching and attractive color appearance.
- Designed for medium to heavy duty applications.
- 10 different shades that coordinate with any interior design.
- This heavy-duty Olefin mat provides greater wiper service than other customary Olefin mats.
- A 65 mil, durable, solid vinyl backing reduces mat movement.
-
Fore-Runner Mat (#0310)
Starting at: $0.00
- This premium outdoor scraper mat removes heavy dirt and debris from bottoms before it reaches your front door.
- This mat features 19 ounces per square yard of ribbon polypropylene which provides vigorous scraping action, removing dirt from shoe bottoms and holding it beneath the surface of the mat.
- The durable, loop-twist construction performs under the harshest of conditions.
- Our vibrant colors retain luster even after years of heavy use.
- An 80 mil durable, solid vinyl backing reduces mat movement.
- Overall thickness, 5/16".
- Custom sizes available.
-
Cross-Over Matting (#0311)
Starting at: $0.00
- This transitional, wiper/scraper mat removes dirt, grit and moisture before it enters your facility.
- This mat features 19 ounces per square yard of continuous filament, loop pile olefin combined with polypropylene ribbon yarn in a loop pile construction, to remove dirt and moisture from shoe bottoms, holding it beneath the surface of the mat.
- Crush-resistant, even under high traffic conditions.
- Our vibrant colors retain luster even after years of heavy use.
- An 80 mil durable, solid vinyl backing reduces mat movement.
- Overall thickness, 5/16".
- Custom sizes available.
-
Renovation Stair Treads (#0500)
Starting at: $0.00
- Our renovation treads are manufactured of high quality, heavy duty extruded aluminum with our exclusive safety traction surface.
- 9" or 11" depth covers most applcations.
- 9/32" thick with 1 1/8" nose.
- 9" treads available up to 144' in one section and 11" treads available up to 96' in one section.
- Treads install easily over existing worn stairways of concrete, wood, steel or terrazzo.
- Available with optional sightline or glow in the dark front edge at an additional cost.
- Holes are drilled and countersunk unless otherwise specified.
-
Medium Duty Vinyl Stair Treads (#0501 375)
Starting at: $0.00
- Medium duty stair tread.
- This tread was designed for use in apartment projects and light commercial applications.
- Lower initial cost, ease of installation, ease of cleaning and long service appeals to apartment owners and builders.
- Extra thick at the front, Meets Fed. Spec. RR-T-650E Type B.
- 3/16" thick, 12" deep, 1 1/4" square or curved nose.
- Contains no asbestos fiber, made of first quality homogeneous vinyl, color throughout.
- Specify either square or curved nose.
-
Diamond Design Rubber Stair Treads (#0501 622)
Starting at: $0.00
- The original diamond design molded rubber stair tread, half diamond design, half smooth, with a longer adjustable nose.
- Designed to fit pan filled, molded concrete, or terrazzo steps.
- For use in commercial, industrial or institutional buildings.
- Diamond design surface is 6" deep, covers the impact area of pedestrian traffic.
- Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)
- Full 1/4" thickness at the nose,12 1/4" depth and a 1 1/4" deep inside nose.
- Contains no asbestos fiber and the color extends throughout the thickness of the tread.
- Available in either square or curved nose.
- Curved nose available in Series I colors only.
- Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
- Strips are available in black, beige, brown, gray, red or yellow.
-
Outdoor Recycled Rubber Stair Tread (#0501 633)
Starting at: $0.00
- Outdoor Recycled Rubber Stair Tread is an excellent tread for exterior applications.
- Made from 100% recycled tires.
- Diamond design surface is 9" deep with a 3" smooth back border.
- Full 1/4" thickness at the nose, 12 1/4" depth and a 1 1/4" deep inside nose.
- Available in square nose only.
-
Disc-O Tread Rubber Stair Treads (#0501 787)
Starting at: $0.00
- New design Adjusta-Nose tread easily adjust to steps with angle between 90o and 60o.
- Ideal for public buildings where fire safety is a prime concern.
- For use in commercial, industrial or institutional buildings.
- Circular disc, 3/4" diameter, are easy to clean and affords for safer pedestrian traffic.
- Meets Fed. Spec. RR-T-650E.
- Flame spread rating of 25 or less using ASTM-E-84 test.
- Full 1/4" thickness at the nose, 12 1/2" depth and a 1 7/8" deep inside nose, smooth rear border is 3" deep.
- Contains no asbestos fiber and the color extends throughout the thickness of the tread.
- Available in standard solid color from Color Series III only.
- Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
- Strips are available in black, beige, brown, gray, red or yellow.
-
Vinyl Anchor Desk Chair Mats (#0506AR)
$0.00- Our anchor mat sits still, even if you don't.
- Mat has hundreds of rigid anchors that hold the mat in place.
- The textured surface facilitates easy but controlled movement of caster chairs.
- The vinyl material is scuff-resistant and is transparent to let the beauty of your carpet show through.
- Available in 3/16" and 1/4" thickness.
- 3/16" material is available in rolls up to 50' in length.
-
Multi-Mat II Rubber Matting (#0611)
Starting at: $0.00
- No other mat offers all these features.
- Mat is not only reversible, but is also highly resistant to grease, oils, and fats.
- Multi-Mat has excellent cushioned support, and is easy to clean.
- Raised knobs facilitate drainage. Dirt and grease flush away easily.
- Non-skid in even wet greasy conditions. Lightweight for ease of handling.
- 3/8" thick
- Custom sizes available
-
Safety Step Rubber Mats (#0622)
Starting at: $0.00
- Low cost, high value mat for any industrial application.
- Anti-fatigue mat withstands wet environments.
- Modular design allows for custom installation.
- Beveled edges and corners are available.
- Molded in connectors on two adjoining sides.
- Mats are available with holes for drainage application.
- 1/2" thick
-
Safe Walk Mats (#0623)
Starting at: $0.00
- Drainage holes allow liquids and waste to pass through matting.
- Comfortable construction eases fatigue and increases productivity.
- Heavy duty 7/8" thick rubber construction for wet enviroments.
- Available in a grease resistant black or a red greaseproof mat.
- Black is also available with a grit coated surface for extra traction.
-
Safe Walk Jr. Rubber Mats (#0624)
Starting at: $0.00
- Finally, a mat with all the features that you need. Lightweight, comfortable and built-in beveled edges.
- Safe Walk Jr. has holes for drainage.
- For use in machine shops, plants, factories or in the kitchen.
- This mat is formulated with grease resistant properties for years of service.
- Available in general purpose black, grease resistant red, or black with a grit coated surface for enhanced traction.
- 1/2" thick.
-
Tri-Grip Nylon Mats (#105)
Starting at: $0.00
- Heavy 100% anti-static nylon face offers outstanding absorption and durability.
- Tight, heat-set Ultra-Twist yarn construction resists packing and crushing.
- Dirt filters into the mat rather than remaining on top.
- Green friendly SBR rubber backing has 20% recycled rubber content and is available in smooth or cleated backing.
- Available with oil and grease resistant 100% Nitrile Rubber backing when applications call for additional protection against oil and grease.
- Outstanding colorfastness. 21 colors available.
- Pile protected with StainStopper coating to keep mat looking good longer.
- Easy to clean: Just vacuum or hose off and hang to dry. Use vacuum and extraction cleaning methods as needed.
- Certified slip-resistant by the National Floor Safety Institute.
- Special lengths up to 60’ are available.
- See item #2100 Tri-Grip XL for extra wide mat options.
-
Waterhog Classic Mats (#200)
Starting at: $0.00
- Premium 24 oz/sq. anti-static Polypropylene fiber system dries quickly and won’t fade or rot.
- When wet, the rubber reinforce surface allows water to be wicked to the bottom of the mat away from foot traffic while providing a slip resistant surface.
- Rubber reinforced face nubs prevent pile from crushing in high traffic areas, thereby maintaining high performance and extending product life.
- Solution dyed for excellent color fastness.
- “Water Dam” border keeps dirt and water in the mat and off the floor, minimizing slip hazards and floor damage.
- Green friendly rubber backing has 20% recycled rubber content and is available in smooth or cleated types.
- Should not be used in areas exposed to animal fats (kitchens) or petroleum products.
- Not adversely affected by salt or ice melt.
- Certified slip-resistant by the National Floor Safety Institute.
- Easy to clean: Just vacuum or hose off and hang to dry.
- Anti-static.
- Available in either Classic Rubber Border or Fabric Fashion Border design.
-
Wayfarer Mats (#265)
$0.00- Vinyl loop construction traps dirt and moisture while scraping debris from shoes.
- Thick vinyl foam backing helps keep the mat in place.
- Tracking of dirt and moisture is minimized, protecting your clean floors and carpets.
- Easy and inexpensive to maintain.
- Just shake, vacuum or rinse out.
- 3/8" thick.
- Custom lengths available.
-
Safety Track Non-Skid Tape - Coarse (#3200)
$0.00- This material fits your specific needs, in assorted shapes and sizes.
- Assists in preventing costly slip and fall accidents and helps in complying with strict OSHA safety standards.
- This material can be used indoors or out, wet or dry, even around oil and grease.
- It goes on like tape to a clean, dry surface and is ready for immediate service.
-
Super Scrape Impression Logo Mats (#3559)
$0.00- Super Scrape Impressions Logo Mats offer a superior printing surface for your company logo or Promotional message
- Multi-color images are created by molding a digitally printed polymeric material into durable Nitrile rubber
- These long-lasting logo mats perform beautifully in all types of environments
- The high-traction surface effectively removes and traps tough dirt, grime and water from shoes
- Photo-realistic images, print ready artwork, tones and shades are all produced with unparalleled detail and clarity. 150 standard color options available.
- PMS color matching available with an upcharge.
- 3/16” thickness.
- Resistant to oils and chemicals.
- Upload your artwork for free proof.
-
Brush Hog Plus Mats (#385)
Starting at: $0.00
- 21 ounce per square yard of extra coarse solution dyed nylon fibers create outstanding scraping action.
- Solution dyed yarn will not fade in sunlight.
- Gripper backing helps to control mat movement especially on carpeted surfaces.
- Passes Flammability Standard DOC-FF-1-70.
- Designed for outdoor use.
- Dries quickly.
- Face nubs are reinforced with rubber to resist crushing, maintaining high performance and extending product life.
- Nub surface: Removes and traps dirt and moisture and holds it on mat below shoe level so it is not tracked in.
- 3/8" thick
-
Safety Scrape Rubber Mats (#400)
Starting at: $0.00
- Heavy durable Safety Scrape mats work wonders in environments where traction is essential.
- In kitchens, locker rooms, on inclines, behind lunch counters and bars, in production areas and outside entrances.
- Constructed of 100% nitrile rubber for oil and chemical resistance.
- 20% post-consumer recycled rubber content.
- Molded face cleats act as scrapers to remove heavy dirt and soil from shoes and provide an excellent anti-skid surface.
- Molded anti-skid gripper backing.
- Available in four OSHA approved striped color border.
- 1/8" thick.
-
Classic Impression Logo Mats (#75)
Starting at: $0.00
- Reproduction of fine details, shading and 3-D images is easily achieved with our state-of-the-art digital printer.
- 100% premium rubber backing with long-wearing, anti-static nylon carpet for years of trouble-free performance.
- Green friendly rubber backing has 15% - 20% recycled content.
- Resists curling and cracking.
- Available in smooth and cleated backing types.
- Available with oil/grease resistant 100% Nitrile Rubber backing when applications call for additional protection.
- LUTRADUR™ primary substrate creates a strong bond between the rubber and carpet.
- Certified slip resistant by the National Floor Safety Institute.
- Custom sizes available.
- Email us your camera ready artwork for a free proof.
-
WP-70 Non-Skid Epoxy Coating (#WP-70)
$0.00- Trowel on, 2 part epoxy system for extreme, durable, long lasting solution.
- For industries, such as breweries, canneries, or off-shore drilling platforms.
- Extra thick consistency requires trowel and squeegee application.
- Packed 1 gallon kit per case.
- 25 - 30 square feet coverage per gallon.
- No flash or volatile solvents, low voc.
- 18 - 24 hour cure time.
- 30 - 60 minute pot life once mixed.
- Squeegee and mixing blade not included.