Manufacturing Plant Mats & Runners
For over 40 years, Mats, Inc. has stocked and distributed a variety of mats and runners to manufacturing plants and distributors. These customers appreciate our easy access, wholesale pricing and stock on hand. Listed below are some of the most popular industrial mats used by manufacturing plants.
-
Smooth Marbleized Vinyl Switchboard Matting (Mil Spec)
- A smooth surface, high voltage insulating vinyl floor covering designed to protect personnel from accidental exposure to electrical potentials not exceeding 3000 volts.
- Conforms to MIL-DTL-15562G (FORMALLY MIL-M-15562F), TYPE I.
- Dielectric Test Voltage -30,000 VAC.
- Proof Tested Over Entire Surface at -15,000 VAC.
- Recommended Maximum Use Voltage -3,000 VAC.
- Marbelized colors.
-
Safety Track Non-Skid Tape - Coarse
- This material fits your specific needs, in assorted shapes and sizes.
- Assists in preventing costly slip and fall accidents and helps in complying with strict OSHA safety standards.
- This material can be used indoors or out, wet or dry, even around oil and grease.
- It goes on like tape to a clean, dry surface and is ready for immediate service.
-
WP-70 Non-Skid Epoxy Coating
- Trowel on, 2 part epoxy system for extreme, durable, long lasting solution.
- For industries, such as breweries, canneries, or off-shore drilling platforms.
- Extra thick consistency requires trowel and squeegee application.
- Packed 1 gallon kit per case.
- 25 - 30 square feet coverage per gallon.
- No flash or volatile solvents, low voc.
- 18 - 24 hour cure time.
- 30 - 60 minute pot life once mixed.
- Squeegee and mixing blade not included.
-
Wide Rib Vinyl Matting
- Same popular design as our standard corrugated rubber matting, but at a very economical price.
- Quiets noise, saves floors in wet or dry weather.
- Most widely used where floor protection and safety are vitally important.
- Easy to clean.
-
Safe Walk Jr. Rubber Mats
- Finally, a mat with all the features that you need. Lightweight, comfortable and built-in beveled edges.
- Safe Walk Jr. has holes for drainage.
- For use in machine shops, plants, factories or in the kitchen.
- This mat is formulated with grease resistant properties for years of service.
- Available in general purpose black, grease resistant red, or black with a grit coated surface for enhanced traction.
- 1/2" thick.
-
Multi-Mat II Rubber Matting
- No other mat offers all these features.
- Mat is not only reversible, but is also highly resistant to grease, oils, and fats.
- Multi-Mat has excellent cushioned support, and is easy to clean.
- Raised knobs facilitate drainage. Dirt and grease flush away easily.
- Non-skid in even wet greasy conditions. Lightweight for ease of handling.
- 3/8" thick
- Custom sizes available
-
Nyracord Perma Walk Matting
- Perma Walk Matting is blended from Nyracord rubber to provide the most durable, anti-slip matting on the market.
- Easy to clean ribs run the length of the roll.
- Ideal for golf courses, hockey rinks, weight rooms and horse trailers.
- Excellent for areas where forklifts or wheeled carts are used.
- Underside is ribbed for aeration, preventing mildew.
- 1/4" thick.
- Sold in full rolls only.
-
Diamond Deck Plate Anti-Fatigue Mat
- Diamond deck plate surface fused to an industrial grade pvc foam backing that offers comfort and relief.
- Surface is resistant to most common fluids and chemicals.
- All four sides are beveled for worker's safety.
- 9/16" and 7/8" thick mats available.
- For use in automotive, industrial, warehouse and shop applications.
- Available in Black, Gray, or Black with Yellow borders.
- See #0692C for additional color options.
- Custom lengths available.
-
Cushion Step Marbleized Rubber Anti-Fatigue Mat
- Durable anti-fatigue mat with a rubber surface bonded to a closed cell foam for superior standing comfort.
- Marbleized top surface hides dirt and and is easy to clean.
- Resist common chemicals and solvents when cleaned regularly.
- All four sides beveled for worker safety.
- Cushion Step is 1/2" thick.
- See #0696 Workers Delight for 5/8" thick mat.
- Used in warehouses, labs, dental offices, pharmacies and cashier stations.
- Available in six designer colors.
- Custom lengths available.
-
Corrugated Rubber Matting
- Runner matting for heavy traffic areas, where non-slip, high traction features are required.
- Quiets noise, saves floors in wet or dry weather.
- Most widely used where floor protection and safety are vitally important.
- Easy to clean, won't curl.
- This matting can be handled more easily under cold conditions than can vinyl.
-
Vinyl Backed Cocoa Matting
- Here is the first shoe and boot cleaning fiber known to man.
- 3/16" thick vinyl backing completely protects floors with no leak-through as with woven brush mats.
- These mats are easily cleaned by shaking, vacuuming or rinsing.
- Available in rolls and are ideal for vestibules and recessed applications.
- Maximum size available is 78 3/4" wide x 41' long.
- Custom sizes available.
-
Diamond Plate Vinyl Switchboard Matting (Mil Spec)
- Conforms to MIL-DTL-15562G (formally MIL-M- 15562F), Type III.
- Dielectric Test Voltage -30,000 VAC.
- Proof Tested Over Entire Surface at -15,000 VAC.
- Recommended Maximum Use Voltage -3,000 VAC.
- This matting uses the functional diamond deck plate pattern for a non slip surface.
- There are many industrial applications for a matting of this quality.
Electrical / Switchboard Matting
Mats, Inc. is a major distributor of dielectric, insulating, electrical switchboard matting. This type of matting must meet certain voltage standards to conform to OSHA & ASTM regulations for use near electrical machinery such as fuse boxes, control panels and other heavy electrical equipment, as used in oilfields, on offshore rigs & in manufacturing plants and facilities. Mats, Inc. can supply a Certificate of Conformance with any purchase of our electrical switchboard matting. Review the voltage & mil spec specifications on the products below to decide which material fits your needs.
- #0213 Corrugated Rubber Switchboard Matting (conforms to ANSI / ASTM D178-01)
- #0213D Diamond Plate Vinyl Switchboard Matting (conforms to MIL-DTL-15562G)
- #0213M Smooth Marbleized Vinyl Switchboard Matting (conforms to MIL-DTL-15562G)
- #0213S Smooth Vinyl Switchboard Matting (conforms to MIL-DTL-15562G)
- #0213V Corrugated Vinyl Switchboard Matting (conforms to ANSI / ASTM D178-01)
- #0213VD Diamond Plate Vinyl Switchboard Matting (conforms to ANSI / ASTM D178-01)
- #0213VDY Diamond Plate Vinyl Switchboard Matting w/ Yellow Border (conforms to ANSI / ASTM D178-01)
- #0213VY Corrugated Vinyl Switchboard Matting w/ Yellow Border (conforms to ANSI / ASTM D178-01)
Rubber & Vinyl Runners
Mats, Inc. offers a variety of rubber & vinyl runners. These runners are an assortment of industrial grade materials in different thicknesses and surface patterns. Some materials are used as aisle & hallway coverings to protect floors. Some plants mark hazardous areas using mats & runners with yellow safety borders. Our smooth runner matting is often used to cover industrial work tables in manufacturing facilities. Some matting is formulated to be especially resistant to grease, oils & chemicals and work well in oily or chemical environments. Our commercial neoprene rubber can be fabricated to desired size & quantity for use in the manufacture of machine parts. Listed below are the runners most often purchased by our industrial manufacturers.
- #265 Wayfarer Mat (backed)
- #266 Wayfarer (unbacked) (oil resistant)
- #0201 Corrugated Rubber Matting
- #0202 Smooth Vinyl Matting
- #0203 Wide Rib Vinyl Matting
- #0203A Corrugated Vinyl Matting
- #0205 Diamond Plate Vinyl Matting
- #0205Y Safety Striped Diamond Plate Vinyl Matting
- #0208A Heavy Duty Corrugated Vinyl Matting
- #0211B Knob Top Niru Rubber Matting (grease resistant)
- #0211CHD Versa Runner Rubber Matting (grease & chemical resistant)
- #0222 Nyracord Perma Walk Matting
- #0611 Multi-Mat II Rubber Matting (grease & oil resistant)
- #1060 Commercial Neoprene Sheet Rubber
Industrial Anti-Fatigue Mats
Industrial manufacturing users & distributors often purchase thick, heavy-duty, anti-fatigue mats & runners for placement behind machines & work tables. Some mats have built-in connectors and can be assembled to cover large areas. Some of our mats have holes for drainage, while other anti-fatigue mats have a solid surface. Mats, Inc. also has anti-fatigue mats for welding stations, as well as anti-fatigue mats with beveled edges and / or yellow / orange safety striped edges.
- #420 Comfort Flow Anti-Fatigue Rubber Mats (grease & oil resistant & welding safe)
- #421 Hog Heaven Anti-Fatigue Mats (grease & oil resistant & welding safe)
- #430 Comfort Scrape Anti-Fatigue Mats (grease & oil resistant & welding safe)
- #964 Air Flex Anti-Fatigue Mats – Rubber Top (chemical resistant)
- #0403 Tire Link Mats (jointed)
- #0604 Tuff Spun Vinyl Anti-Fatigue Matting
- #0604S Safety Striped Anti-Fatigue Matting
- #0605 Comfort King Anti-Fatigue Matting
- #0616 Cushion Tiles (built-in connectors)
- #0616G Grit Top Cushion Tile (built-in connectors)
- #0622 Safety Step Rubber Mats (built-in connectors)
- #0624 Safe Walk Jr. Rubber Mats
- #0690 Cushion Step Marbleized Rubber Anti-Fatigue Mat
- #0692 Diamond Deck Plate Anti-Fatigue Mat
Absorbent Mats
Mats, Inc. can provide oil trap mats. These mats are available in sets. The set includes 1 rubber tray and 12 disposable mats. Oil trap mats are used in industrial, oily environments to absorb oil spills & leakage. Disposable mats are replaced as needed.
Anti-Slip Tapes & Coating
These products are typically used in slippery areas to deter slips & falls. Mats, Inc. offers abrasive, anti-slip, self-adhesive tapes or slip resistant coating that can be painted on problem surfaces. Conformable tapes are designed to conform to uneven surfaces, such as a metal diamond design, as seen on marine vessels.
- #3200 Safety Track Non-Slip Tape – Coarse
- #3700 Safety Track Non-Slip Tape – Conformable
- #WP-70 Epoxy Non-Skid Coating
Flexible Steel Mats
Mats, Inc. stocks flexible steel mats in a variety of sizes for use in industrial manufacturing environments. These heavy-duty industrial mats are great for scraping mud from shoes & boots.
Anti-Static Matting
Mats, Inc. provides anti-static, anti-fatigue matting for use in electronic assembly areas, test benches, test stations and checkout counters.
- #0309 Stat-Zap Anti-Static Carpet Mat
- #0603 Comfort King Anti-Static Matting
- #0695 Stat-Control Anti-Static Anti-Fatigue Mat
Interior Mats & Runners
Mats, Inc. stocks a line of carpet-topped, vinyl-backed door mats & runners in a variety of sizes. These mats are typically used inside and are available in an array of colors, textures & grades. The most common & least expensive door mat used by industrial manufacturing customers would be our #0302 Rely-On Olefin Matting.
- #0302 Rely-on Olefin Matting
- #0318 Chevron Matting
- #0319 Needle Pin Matting
- #0320 Needle Rib Matting
Exterior Mats & Runners
These mats are typically constructed of rubber or some type of plastic scraper material. The scraper surface efficiently removes mud & dirt from shoes & boots. Exterior mats are designed to drain & dry quickly. #266 Wayfarer Custom Mats are often used in the oily areas of a manufacturing plant. This mat is unbacked & allows petroleum products to drain through mats to help prevent slips & falls.
- #265 Wayfarer Mats (backed)
- #266 Wayfarer Custom Mats (unbacked) (grease resistant)
- #400 Safety Scrape Rubber Mats
- #0310 Fore-Runner Mats & Matting
Cocoa Matting
Mats, Inc. consistently supplies industrial users with cocoa matting. Cocoa matting is derived from coconut husks. Its heavy duty fiber provides thorough shoe cleaning and absorption. Cocoa mats are frequently used on oil rigs and in manufacturing facilities due to their ability to absorb oil products.
Pool, Shower & Locker Room Matting
Offshore rigs, tanker facilities and industrial manufacturing plants may require anti-slip & drainage mats to control slips & falls in wet areas such as showers, locker rooms & living quarter areas. These mats are designed with an anti-slip surface and holes to keep water from puddling on surface of mats. Our most popular mats designed for this purpose are listed below.
Manufacturing Facilities
For over 40 years, Mats, Inc. has stocked and distributed a variety of mats and runners to manufacturing plants and distributors. These customers appreciate our easy access, wholesale pricing and stock on hand. Listed below are some of the most popular industrial mats used by manufacturing plants.