Oilfield Rig Mats
Mats Inc.'s oilfield rig mats are a great way to increase safety on the job. These mats, made specifically for rough terrain, provide exceptional traction and support. Each mat withstands high traffic and heavy machinery, showing its endurance in severe oilfield circumstances.
Our rig floor mats have many uses beyond just providing a solid floor. They reduce accidents, adding considerably to your team's safety. Buying these mats is more than just a transaction; it's an investment in the well-being of your staff.
Mats Inc. is familiar with the difficulties found in oil fields. Thus, we have designed our mats to be impervious to grease, chemicals, and even the harshest climates. They are a practical option for any oilfield since our rig matting is simple to clean, maintain, and move.
Enjoy more output, fewer accidents, and stress-free use with a product that stands the test of time.
-
Smooth Marbleized Vinyl Switchboard Matting (Mil Spec)
- A smooth surface, high voltage insulating vinyl floor covering designed to protect personnel from accidental exposure to electrical potentials not exceeding 3000 volts.
- Conforms to MIL-DTL-15562G (FORMALLY MIL-M-15562F), TYPE I.
- Dielectric Test Voltage -30,000 VAC.
- Proof Tested Over Entire Surface at -15,000 VAC.
- Recommended Maximum Use Voltage -3,000 VAC.
- Marbelized colors.
-
Safety Track Non-Skid Tape - Coarse
- This material fits your specific needs, in assorted shapes and sizes.
- Assists in preventing costly slip and fall accidents and helps in complying with strict OSHA safety standards.
- This material can be used indoors or out, wet or dry, even around oil and grease.
- It goes on like tape to a clean, dry surface and is ready for immediate service.
-
WP-70 Non-Skid Epoxy Coating
- Trowel on, 2 part epoxy system for extreme, durable, long lasting solution.
- For industries, such as breweries, canneries, or off-shore drilling platforms.
- Extra thick consistency requires trowel and squeegee application.
- Packed 1 gallon kit per case.
- 25 - 30 square feet coverage per gallon.
- No flash or volatile solvents, low voc.
- 18 - 24 hour cure time.
- 30 - 60 minute pot life once mixed.
- Squeegee and mixing blade not included.
-
Wide Rib Vinyl Matting
- Same popular design as our standard corrugated rubber matting, but at a very economical price.
- Quiets noise, saves floors in wet or dry weather.
- Most widely used where floor protection and safety are vitally important.
- Easy to clean.
-
Safe Walk Jr. Rubber Mats
- Finally, a mat with all the features that you need. Lightweight, comfortable and built-in beveled edges.
- Safe Walk Jr. has holes for drainage.
- For use in machine shops, plants, factories or in the kitchen.
- This mat is formulated with grease resistant properties for years of service.
- Available in general purpose black, grease resistant red, or black with a grit coated surface for enhanced traction.
- 1/2" thick.
-
Multi-Mat II Rubber Matting
- No other mat offers all these features.
- Mat is not only reversible, but is also highly resistant to grease, oils, and fats.
- Multi-Mat has excellent cushioned support, and is easy to clean.
- Raised knobs facilitate drainage. Dirt and grease flush away easily.
- Non-skid in even wet greasy conditions. Lightweight for ease of handling.
- 3/8" thick
- Custom sizes available
-
Nyracord Perma Walk Matting
- Perma Walk Matting is blended from Nyracord rubber to provide the most durable, anti-slip matting on the market.
- Easy to clean ribs run the length of the roll.
- Ideal for golf courses, hockey rinks, weight rooms and horse trailers.
- Excellent for areas where forklifts or wheeled carts are used.
- Underside is ribbed for aeration, preventing mildew.
- 1/4" thick.
- Sold in full rolls only.
-
Corrugated Rubber Matting
- Runner matting for heavy traffic areas, where non-slip, high traction features are required.
- Quiets noise, saves floors in wet or dry weather.
- Most widely used where floor protection and safety are vitally important.
- Easy to clean, won't curl.
- This matting can be handled more easily under cold conditions than can vinyl.
-
Vinyl Backed Cocoa Matting
- Here is the first shoe and boot cleaning fiber known to man.
- 3/16" thick vinyl backing completely protects floors with no leak-through as with woven brush mats.
- These mats are easily cleaned by shaking, vacuuming or rinsing.
- Available in rolls and are ideal for vestibules and recessed applications.
- Maximum size available is 78 3/4" wide x 41' long.
- Custom sizes available.
-
Diamond Plate Vinyl Switchboard Matting (Mil Spec)
- Conforms to MIL-DTL-15562G (formally MIL-M- 15562F), Type III.
- Dielectric Test Voltage -30,000 VAC.
- Proof Tested Over Entire Surface at -15,000 VAC.
- Recommended Maximum Use Voltage -3,000 VAC.
- This matting uses the functional diamond deck plate pattern for a non slip surface.
- There are many industrial applications for a matting of this quality.
-
Smooth Vinyl Switchboard Matting (Mil Spec)
- A smooth surface, high voltage insulating vinyl floor covering designed to protect personnel from accidental exposure to electrical potentials not exceeding 3000 volts.
- Conforms to MIL-DTL-15562G (FORMALLY MIL-M-15562F), TYPE II.
- Dielectric Test Voltage -30,000 VAC.
- Proof Tested Over Entire Surface at -15,000 VAC.
- Recommended Maximum Use Voltage -3,000 VAC.
-
Diamond Plate Vinyl Switchboard Matting (ASTM)
- Conforms to ANSI/ASTM D178, TYPE II, CLASS 2.
- Conforms to TABLE 3 for oil-resistance and flame-resistance.
- Dielectric strength 30,000 volts A.C.
- Proof tested at 20,000 volts A.C.
- Recommended maximum use voltage is 17,000 A.C.
- Diamond pattern.
Oilfield
Mats Inc.'s oilfield rig mats are a great way to increase safety on the job. These mats, made specifically for rough terrain, provide exceptional traction and support. Each mat withstands high traffic and heavy machinery, showing its endurance in severe oilfield circumstances.
Our rig floor mats have many uses beyond just providing a solid floor. They reduce accidents, adding considerably to your team's safety. Buying these mats is more than just a transaction; it's an investment in the well-being of your staff.
Mats Inc. is familiar with the difficulties found in oil fields. Thus, we have designed our mats to be impervious to grease, chemicals, and even the harshest climates. They are a practical option for any oilfield since our rig matting is simple to clean, maintain, and move.
Enjoy more output, fewer accidents, and stress-free use with a product that stands the test of time.