Healthcare Floor Mats

SPECIFICATION:

• Rollup grate shall be heavy duty 3/4" rollup grate
• Tread rails shall be 6063-T52 aluminum, spaced 1-1/2" on center and connected with polyprene thermoplastic rubber hinges/footpads with 1" x 1/8" slotted holes for maximum drainage.
• 1000 lbs./wheel rolling load weight capacity.
• Specify aluminum finish.
  

SPECIFICATION:

• Grate shall be Perfec Grate
• Tread rails shall be 6063-T52 aluminum spaced 1-1/2" on center and secured with keylock bars on 6" centers, both mechanically locked and welded in place for maximum strength.
  
• 300 lbs./wheel rolling load weight capacity.
• Specify aluminum finish
  

SPECIFICATION:

• Rollup mat shall be 3/8" Perfec Mat -specify number.
• Tread rails shall be 6063-T52 aluminum, spaced 2" on center and connected with polyprene thermoplastic rubber hinges/footpads with 1" x 3/16" slotted holes for maximum drainage.
• 300 lbs./wheel rolling load weight capacity.
• Specify aluminum finish.
  

SPECIFICATION:

• Rollup mat shall be 3/8" Perfec Mat
• Tread rails shall be 6063-T52 aluminum, spaced 2" on center and connected with a long lasting, size retentive aluminum hinge with 1" x 3/16" slotted holes for maximum drainage.
• 300 lbs./wheel rolling load weight capacity.
• Specify aluminum finish
  

• Our Perfec Clean Mats & Grates provide a comfortable, surefooted surface that helps eliminate wet, slippery floors caused by tracked in mud, dirt, and water.
• These mats are available in either our exclusive thermoplastic rubber hinge or our standard aluminum hinge.
• Mats can be recessed or surface mounted.
• Our grates are manufactured of rigid aluminum rails that allow dirt, sand, and water to collect below the surface.
• All our floor products are available in a wide range of colors and materials to accent your building design.

• Made of extruded 6063 aluminum alloy and are fabricated to exact dimensions to insure fit to the mat.
• Frames are supplied with mitered corners and shipped unassembled with all necessary anchor keys and corner pins.
• Frames must be assembled at the job site and installed so that upper edge is level with finished floor surface.
• The frame should be anchored into cement with anchor keys a minimum of 24" on centers.
• Corner pins should be installed at all corners of frame.
• For use on mats of 3/8" - 5/8" thickness
• "Dimensions" are inside frame dimensions.

• This is a unique floor covering in tile and strip form manufactured from recycled strips of industrial tire carcasses.
  
• The walking surface of the strips is chenille and vulcanized to a flexible backing. It is tough, non-absorbing, high wear flooring for use indoor or outdoor, in public buildings, schools, ramps, locker rooms, or entrances.
  
• May be vacuumed. Use mild detergent and stiff brush to clean heavily soiled areas.
  
• Use our environmentally friendly adhesive to bond tiles to floor.
  
• Adhesive covers approximately 100 square feet per gallon.

• Highest quality rubber gym flooring available. Offers extreme durability and can be found in many different applications.
• FloorScore Certified and may quality for LEED credits.
• High shock absorbency and long-wearing toughness make tile lock rubber gym tiles the popular choice for all types of athletic facilities.
• Interlocking tiles are simple to install and accommodate most areas.
• Textured surface pattern provides sure footing - slip resistant in wet or dry conditions.
• Protects floor from skate blades and free weights.
• Tiles can be custom cut on site.
• 3/8" thick
• Colored mats made from 90% SBR Black rubber and 10% color EPDM/Recycled Rubber
• Suggested Uses: Weight Rooms, Fitness Centers/Home Gyms, Recreation - Health Clubs, Golf Courses, Schools/Universities, Day Care Centers, Fire/Police Stations, Physical Therapy Centers, Ice Skating Facilities, etc.

• This material is ideal for any type of entrance area, indoors and out.
• Berber is impervious to ultra-violet light and can be cut into any size or shape without danger of the edges unraveling.
• Berber is tough as steel, but looks like carpet.
• Can be direct glued down or made into custom size mats with edging applied to all sides.
• Corporate logo or design can be added for a custom look.
• Email us your artwork for free proof and quote.

• Like all of our polypropylene matting, Super Berber matting is long wearing and UV stable.
• It can be used indoor or out. Super Berber can be vacuumed, steam cleaned or hosed off.
• It can be cut at any angle without danger of the edge unraveling.
• Available with a smooth backing for recessed application or knob back for free lay application.
• Custom sizes are available with a high profile vinyl edging applied to all sides.
• Inlaid logos available.
  
• Passes smoke density test ASTM E662.
  
• Passes surface flammabilty test FF 1-70 / ASTM D2859.
  

• Hard wearing 100% continuous filament Olefin pile takes heavy traffic without fuzzing or pilling.
• Colorfast, even in direct sunlight.
• Traps one gallon of water per square yard. 
• Easy to clean - just vacuum or hose.
• Backed with solid vinyl for even greater protection.
• Three year warranty!
• Custom sizes available.

• This premium outdoor scraper mat removes heavy dirt and debris from bottoms before it reaches your front door.
• This mat features 19 ounces per square yard of ribbon polypropylene which provides vigorous scraping action, removing dirt from shoe bottoms and holding it beneath the surface of the mat.
• The durable, loop-twist construction performs under the harshest of conditions.
• Our vibrant colors retain luster even after years of heavy use.
• An 80 mil durable, solid vinyl backing reduces mat movement.
• Overall thickness, 5/16".
• Custom sizes available.

• This transitional, wiper/scraper mat removes dirt, grit and moisture before it enters your facility.
• This mat features 19 ounces per square yard of continuous filament, loop pile olefin combined with polypropylene ribbon yarn in a loop pile construction, to remove dirt and moisture from shoe bottoms, holding it beneath the surface of the mat.
• Crush-resistant, even under high traffic conditions.
• Our vibrant colors retain luster even after years of heavy use.
• An 80 mil durable, solid vinyl backing reduces mat movement.
• Overall thickness, 5/16".
• Custom sizes available.

• The decorative chevron pattern promotes multi-directional brushing action.
• The 100% polypropylene needle punch fibers help retain moisture and channel dirt away.
• Bonded to a durable pvc backing.
• Vivid non-fading colors.
• Custom sizes available.

• Here is the first shoe and boot cleaning fiber known to man.
• 3/16" thick vinyl backing completely protects floors with no leak-through as with woven brush mats.
• These mats are easily cleaned by shaking, vacuuming or rinsing.
• Available in rolls and are ideal for vestibules and recessed applications.
• Maximum size available is 78 3/4" wide x 41' long.
• Custom sizes available.

• Our renovation treads are manufactured of high quality, heavy duty extruded aluminum with our exclusive safety traction surface.
• 9" or 11" depth covers most applcations.
• 9/32" thick with 1 1/8" nose.
• 9" treads available up to 144' in one section and 11" treads available up to 96' in one section.
• Treads install easily over existing worn stairways of concrete, wood, steel or terrazzo.
• Available with optional sightline or glow in the dark front edge at an additional cost.
• Holes are drilled and countersunk unless otherwise specified.

• Medium duty stair tread.
• This tread was designed for use in apartment projects and light commercial applications. 
  
• Lower initial cost, ease of installation, ease of cleaning and long service appeals to apartment owners and builders.
• Extra thick at the front, Meets Fed. Spec. RR-T-650E Type B.
• 3/16" thick, 12" deep, 1 1/4" square or curved nose.
• Contains no asbestos fiber, made of first quality homogeneous vinyl, color throughout.
• Specify either square or curved nose.
  

• Heavy gauge sharp-rib design koroseal vinyl tread for your heaviest traffic. 
  
• 1/4" thick at the wear area.
• Meets Fed. Spec. RR-T-650E Type B.
• 1/4" thick, 12" deep.
  
• Contains no asbestos fiber, made of first quality vinyl color throughout.
• Square nose only.

• The original diamond design molded rubber stair tread, half diamond design, half smooth, with a longer adjustable nose.
• Designed to fit pan filled, molded concrete, or terrazzo steps.
• For use in commercial, industrial or institutional buildings.
• Diamond design surface is 6" deep, covers the impact area of pedestrian traffic.
• Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)
• Full 1/4" thickness at the nose,12 1/4" depth and a 1 1/4" deep inside nose.
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
• Available in either square or curved nose.
• Curved nose available in Series I colors only.
• Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
• Strips are available in black, beige, brown, gray, red or yellow.

• Diamond design tile is ideal for stair landings, lobbies, aisles, ramps, elevators or entryways.
  
• Diamond design pattern matches diamond design stair treads.
  
• For use in commercial, industrial or institutional buildings.
• 7/32" thick, 24" x 24" factory cut tile.
  
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
  
• Select standard color from Series I, II, or III.
  

• Outdoor Recycled Rubber Stair Tread is an excellent tread for exterior applications.
• Made from 100% recycled tires.
• Diamond design surface is 9" deep with a 3" smooth back border.
• Full 1/4" thickness at the nose, 12 1/4" depth and a 1 1/4" deep inside nose.
• Available in square nose only.

• New design Adjusta-Nose tread easily adjust to steps with angle between 90^o and 60^o.
• Ideal for public buildings where fire safety is a prime concern.
• For use in commercial, industrial or institutional buildings.
• Circular disc, 3/4" diameter, are easy to clean and affords for safer pedestrian traffic.
• Meets Fed. Spec. RR-T-650E.
• Flame spread rating of 25 or less using ASTM-E-84 test.
• Full 1/4" thickness at the nose, 12 1/2" depth and a 1 7/8" deep inside nose, smooth rear border is 3" deep.
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
  
• Available in standard solid color from Color Series III only.
• Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
• Strips are available in black, beige, brown, gray, red or yellow.

• Unique floor tile with raised circular disc, 3/4" diameter, for better traction.
  
• Circular pattern matches DISCO-O-TREAD stair treads.
• Factory cut 24" x 24" square tiles for fewer joints and quicker installation.
  
• For use in commercial, industrial or institutional buildings.
• 3/16" thick.
  
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
• Flame spread rating of 25 or less using ASTM-E-84 test.
  
• Select standard color from Series III.
  

• Our LO-DISC tread has the popular round disc design, but in a lighter gauge stair tread.
• Treads have tapered 3/4" disc, raised .025".
• Excellent for lighter traffic stairways.
• Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)
• Flame spread rating of 75 or less using ASTM-E-84 test.
• Full 3/16" thickness at the nose, 12 1/4" depth and a 1 1/2" deep inside nose.
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
• Available in square nose only.
• Select standard color from Color Series I, II, or III.
• Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
• Strips are available in black, beige, brown, gray, red or yellow.

• Our anchor mat sits still, even if you don't.
• Mat has hundreds of rigid anchors that hold the mat in place.
• The textured surface facilitates easy but controlled movement of caster chairs.
• The vinyl material is scuff-resistant and is transparent to let the beauty of your carpet show through.
• Available in 3/16" and 1/4" thickness.
• 3/16" material is available in rolls up to 50' in length.

• Durable closed cell PVC sponge matting offers economical fatigue relief.
• A must for worker comfort and safety.
• This anti-fatigue material increases productivity throughout the workplace.
• 3/8" or 5/8" thick.
• Ribbed or pebble design.
• Custom lengths available.
• See #0604S for mat with yellow border.

• Comfort King offers triple the resiliency of other vinyl foam mats.
• Out performs other vinyl foam products in low temperature applications.
• It's extended durability keeps it performing twice as long as typical pebble mats and three times longer than ribbed surface products.
• Comfort-King reduces strain on feet, ankles, legs, and lower back.
• This mat induces natural flexing of the muscles, reducing the build-up of lactic acid that causes fatigue.
• Available in standard 3/8" or supreme 1/2" thickness.
• See #0605S for Comfort-King with yellow border.
• Custom sizes available.