Property Management Floor Mats

SPECIFICATION:

• Rollup grate shall be heavy duty 3/4" rollup grate
• Tread rails shall be 6063-T52 aluminum, spaced 1-1/2" on center and connected with polyprene thermoplastic rubber hinges/footpads with 1" x 1/8" slotted holes for maximum drainage.
• 1000 lbs./wheel rolling load weight capacity.
• Specify aluminum finish.
  

SPECIFICATION:

• Grate shall be Perfec Grate
• Tread rails shall be 6063-T52 aluminum spaced 1-1/2" on center and secured with keylock bars on 6" centers, both mechanically locked and welded in place for maximum strength.
  
• 300 lbs./wheel rolling load weight capacity.
• Specify aluminum finish
  

SPECIFICATION:

• Rollup mat shall be 3/8" Perfec Mat
• Tread rails shall be 6063-T52 aluminum, spaced 2" on center and connected with a long lasting, size retentive aluminum hinge with 1" x 3/16" slotted holes for maximum drainage.
• 300 lbs./wheel rolling load weight capacity.
• Specify aluminum finish
  

• Our Perfec Clean Mats & Grates provide a comfortable, surefooted surface that helps eliminate wet, slippery floors caused by tracked in mud, dirt, and water.
• These mats are available in either our exclusive thermoplastic rubber hinge or our standard aluminum hinge.
• Mats can be recessed or surface mounted.
• Our grates are manufactured of rigid aluminum rails that allow dirt, sand, and water to collect below the surface.
• All our floor products are available in a wide range of colors and materials to accent your building design.

• Made of extruded 6063 aluminum alloy and are fabricated to exact dimensions to insure fit to the mat.
• Frames are supplied with mitered corners and shipped unassembled with all necessary anchor keys and corner pins.
• Frames must be assembled at the job site and installed so that upper edge is level with finished floor surface.
• The frame should be anchored into cement with anchor keys a minimum of 24" on centers.
• Corner pins should be installed at all corners of frame.
• For use on mats of 3/8" - 5/8" thickness
• "Dimensions" are inside frame dimensions.

• This is a unique floor covering in tile and strip form manufactured from recycled strips of industrial tire carcasses.
  
• The walking surface of the strips is chenille and vulcanized to a flexible backing. It is tough, non-absorbing, high wear flooring for use indoor or outdoor, in public buildings, schools, ramps, locker rooms, or entrances.
  
• May be vacuumed. Use mild detergent and stiff brush to clean heavily soiled areas.
  
• Use our environmentally friendly adhesive to bond tiles to floor.
  
• Adhesive covers approximately 100 square feet per gallon.

• Highest quality rubber gym flooring available. Offers extreme durability and can be found in many different applications.
• FloorScore Certified and may quality for LEED credits.
• High shock absorbency and long-wearing toughness make tile lock rubber gym tiles the popular choice for all types of athletic facilities.
• Interlocking tiles are simple to install and accommodate most areas.
• Textured surface pattern provides sure footing - slip resistant in wet or dry conditions.
• Protects floor from skate blades and free weights.
• Tiles can be custom cut on site.
• 3/8" thick
• Colored mats made from 90% SBR Black rubber and 10% color EPDM/Recycled Rubber
• Suggested Uses: Weight Rooms, Fitness Centers/Home Gyms, Recreation - Health Clubs, Golf Courses, Schools/Universities, Day Care Centers, Fire/Police Stations, Physical Therapy Centers, Ice Skating Facilities, etc.

• This material is ideal for any type of entrance area, indoors and out.
• Berber is impervious to ultra-violet light and can be cut into any size or shape without danger of the edges unraveling.
• Berber is tough as steel, but looks like carpet.
• Can be direct glued down or made into custom size mats with edging applied to all sides.
• Corporate logo or design can be added for a custom look.
• Email us your artwork for free proof and quote.

• This mat features 17 ounces of 3300 denier, continuous filament Olefin yarn per square yard.
• Absorbs moisture and dries quickly.
• 100% Olefin solution-dyed yarns maintain eye catching and attractive color appearance.
• Designed for medium to heavy duty applications.
• 10 different shades that coordinate with any interior design.
• This heavy-duty Olefin mat provides greater wiper service than other customary Olefin mats.
• A 65 mil, durable, solid vinyl backing reduces mat movement.

• This premium outdoor scraper mat removes heavy dirt and debris from bottoms before it reaches your front door.
• This mat features 19 ounces per square yard of ribbon polypropylene which provides vigorous scraping action, removing dirt from shoe bottoms and holding it beneath the surface of the mat.
• The durable, loop-twist construction performs under the harshest of conditions.
• Our vibrant colors retain luster even after years of heavy use.
• An 80 mil durable, solid vinyl backing reduces mat movement.
• Overall thickness, 5/16".
• Custom sizes available.

• This transitional, wiper/scraper mat removes dirt, grit and moisture before it enters your facility.
• This mat features 19 ounces per square yard of continuous filament, loop pile olefin combined with polypropylene ribbon yarn in a loop pile construction, to remove dirt and moisture from shoe bottoms, holding it beneath the surface of the mat.
• Crush-resistant, even under high traffic conditions.
• Our vibrant colors retain luster even after years of heavy use.
• An 80 mil durable, solid vinyl backing reduces mat movement.
• Overall thickness, 5/16".
• Custom sizes available.

• Here is the first shoe and boot cleaning fiber known to man.
• 3/16" thick vinyl backing completely protects floors with no leak-through as with woven brush mats.
• These mats are easily cleaned by shaking, vacuuming or rinsing.
• Available in rolls and are ideal for vestibules and recessed applications.
• Maximum size available is 78 3/4" wide x 41' long.
• Custom sizes available.

• Our renovation treads are manufactured of high quality, heavy duty extruded aluminum with our exclusive safety traction surface.
• 9" or 11" depth covers most applcations.
• 9/32" thick with 1 1/8" nose.
• 9" treads available up to 144' in one section and 11" treads available up to 96' in one section.
• Treads install easily over existing worn stairways of concrete, wood, steel or terrazzo.
• Available with optional sightline or glow in the dark front edge at an additional cost.
• Holes are drilled and countersunk unless otherwise specified.

• Medium duty stair tread.
• This tread was designed for use in apartment projects and light commercial applications. 
  
• Lower initial cost, ease of installation, ease of cleaning and long service appeals to apartment owners and builders.
• Extra thick at the front, Meets Fed. Spec. RR-T-650E Type B.
• 3/16" thick, 12" deep, 1 1/4" square or curved nose.
• Contains no asbestos fiber, made of first quality homogeneous vinyl, color throughout.
• Specify either square or curved nose.
  

• The original diamond design molded rubber stair tread, half diamond design, half smooth, with a longer adjustable nose.
• Designed to fit pan filled, molded concrete, or terrazzo steps.
• For use in commercial, industrial or institutional buildings.
• Diamond design surface is 6" deep, covers the impact area of pedestrian traffic.
• Meets Fed. Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)
• Full 1/4" thickness at the nose,12 1/4" depth and a 1 1/4" deep inside nose.
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
• Available in either square or curved nose.
• Curved nose available in Series I colors only.
• Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
• Strips are available in black, beige, brown, gray, red or yellow.

• Outdoor Recycled Rubber Stair Tread is an excellent tread for exterior applications.
• Made from 100% recycled tires.
• Diamond design surface is 9" deep with a 3" smooth back border.
• Full 1/4" thickness at the nose, 12 1/4" depth and a 1 1/4" deep inside nose.
• Available in square nose only.

• New design Adjusta-Nose tread easily adjust to steps with angle between 90^o and 60^o.
• Ideal for public buildings where fire safety is a prime concern.
• For use in commercial, industrial or institutional buildings.
• Circular disc, 3/4" diameter, are easy to clean and affords for safer pedestrian traffic.
• Meets Fed. Spec. RR-T-650E.
• Flame spread rating of 25 or less using ASTM-E-84 test.
• Full 1/4" thickness at the nose, 12 1/2" depth and a 1 7/8" deep inside nose, smooth rear border is 3" deep.
• Contains no asbestos fiber and the color extends throughout the thickness of the tread.
  
• Available in standard solid color from Color Series III only.
• Treads are optionally available with either two 3/4" safety strips, one 2" safety strip, or one 2" photoluminescent strip.
• Strips are available in black, beige, brown, gray, red or yellow.

• Our anchor mat sits still, even if you don't.
• Mat has hundreds of rigid anchors that hold the mat in place.
• The textured surface facilitates easy but controlled movement of caster chairs.
• The vinyl material is scuff-resistant and is transparent to let the beauty of your carpet show through.
• Available in 3/16" and 1/4" thickness.
• 3/16" material is available in rolls up to 50' in length.

• These multi-purpose pads can take all the punishment you can throw at them.
  
• Use them in weight rooms, at workout stations, even in horse trailers or stalls.
• Protects your floor and provides sure footing.
• Can also be used as a safe, economical solution to protect roofs from damaging foot traffic.
• Mats are not affected by freeze/thaw conditions.
• Compatible with single ply or built-up roofing.
  

• Heavy 100% anti-static nylon face offers outstanding absorption and durability.
• Tight, heat-set Ultra-Twist yarn construction resists packing and crushing.
• Dirt filters into the mat rather than remaining on top.
• Green friendly SBR rubber backing has 20% recycled rubber content and is available in smooth or cleated backing.
• Available with oil and grease resistant 100% Nitrile Rubber backing when applications call for additional protection against oil and grease.
• Outstanding colorfastness. 21 colors available.
• Pile protected with StainStopper coating to keep mat looking good longer.
• Easy to clean: Just vacuum or hose off and hang to dry. Use vacuum and extraction cleaning methods as needed.
• Certified slip-resistant by the National Floor Safety Institute.
• Special lengths up to 60’ are available.
• See item #2100 Tri-Grip XL for extra wide mat options.

• Premium 24 oz/sq. anti-static Polypropylene fiber system dries quickly and won’t fade or rot.
• When wet, the rubber reinforce surface allows water to be wicked to the bottom of the mat away from foot traffic while providing a slip resistant surface.
• Rubber reinforced face nubs prevent pile from crushing in high traffic areas, thereby maintaining high performance and extending product life.
• Solution dyed for excellent color fastness.
• “Water Dam” border keeps dirt and water in the mat and off the floor, minimizing slip hazards and floor damage.
• Green friendly rubber backing has 20% recycled rubber content and is available in smooth or cleated types.
• Should not be used in areas exposed to animal fats (kitchens) or petroleum products.
• Not adversely affected by salt or ice melt.
• Certified slip-resistant by the National Floor Safety Institute.
• Easy to clean: Just vacuum or hose off and hang to dry.
• Anti-static.
• Available in either Classic Rubber Border or Fabric Fashion Border design.

• Premium 24 oz/sq. anti-static Polypropylene fiber system dries quickly and won’t fade or rot.
• When wet, the rubber reinforce surface allows water to be wicked to the bottom of the mat away from foot traffic while providing a slip resistant surface.
• Rubber reinforced face nubs and waffle design provide bi-level crush proof scraping action for years of durable service.
• Colorfast: Solution dyed for excellent light and wet fastness.
• “Water Dam” border keeps dirt and water in the mat and off the floor, minimizing slip hazards and floor damage.
• Green friendly rubber backing has 20% recycled rubber content and is available in smooth or cleated types.
• Should not be used in areas exposed to animal fats (kitchens) or petroleum products.
• Not adversely affected by salt or ice melt.
• Certified slip-resistant by the National Floor Safety Institute.
• Easy to clean: Just vacuum or hose off and hang to dry.
• Anti-static.
• Available in either Classic Rubber Border or Fabric Fashion Border design.

• 24 ounce per square yard anti-static 100% premium polypropylene fiber system dries quickly and won’t fade or rot.
• When wet, the rubber-reinforced surface allows water to be wicked to the bottom of the mat, below foot traffic and providing a slip-resistant surface.
• Solution dyed for excellent color fastness.
• Unique ridged construction effectively stores dirt and moisture beneath shoe level.
• Damaged or worn tiles can be replaced easily.
• Install with solvent-free permanent adhesive.
• Exclusive rubber reinforced face nubs prevent pile from crushing in high traffic areas, thereby maintaining high performance and extending product life.
• Should not be in areas exposed to animal fats (kitchens) or petroleum products.
• Not adversely affected by salt or ice melt.
• Easy to clean: Just vacuum. An upright carpet extractor may also be used with permanent adhesives.
• Certified slip-resistant by the National Floor Safety Institute.
• Available in either 1/4" or 7/16" thickness.
• Tile size: 18” x 18”.

• Waterhog Eco Grand Elite mats are manufactured with a permanent rubber reinforced bi-level face that will not crush providing years of superior dirt and moisture collection.
• Mats are made with 100% PET Polyester post-consumer recycled fiber made from used plastic bottles for the face and a 100% rubber backing that contains 20% post-consumer recycled tires.
• Every square foot of a Waterhog Eco Grand Elite mat eliminated 4 half liter bottles from the waste stream.
• Waterhog Eco Grand Elite mats have a color coordinating fabric border.
• Available with a cleated backing as a standard for carpeted surfaces or with an optional smooth backing for hard floor surfaces.
• Every Waterhog Eco Grand Elite mat (except #2246) comes with the universal recycle symbol molded into the face of the mat. 
• 30 ounce face weight, 3/8" thickness, fabric borders, and herringbone pattern.
  

Related products: #2244, #2246

• Waterhog Eco Premier mats combine all of the performance of the original WaterHog with a unique diamond face pattern creating the ultimate visual appearance. WaterHog Eco Premier mats feature a 100% post-consumer recycled PET face that is reclaimed from plastic bottles.
• Every 3' x 5' mat diverts approximately 60 plastic bottles from landfills.
• A multi-denier fiber construction combines thick fibers for scraping with fine fibers for wiping, providing better performance and longer life.
• The backings of WaterHog Eco Premier mats is made of 100% rubber with 15% to 20% recycled rubber content making these mats our most environmentally friendly mats ever.

• Indoor/Outdoor: Durable polypropylene face yarn suitable for indoor or outdoor use.
• Polypropylene fiber system dries quickly preventing fading and rotting.
• 18 colors available. Place up to 5 colors per mat.
• Green friendly rubber backing has 20% recycled rubber content.
• Provides a slip resistant surface which effectively removes tough dirt, grime and water from feet.
• Anti-static: Waterhog Inlay Logo mats have a maximum average voltage of 1.6 KV as measured by the AATCC 134 Electrostatic Propensity Test and meets IBM’s resistance (NFPA99).
• Waterhog mats are safe for use in computer rooms and around electronic equipment.
• Certified slip resistant by the National Floor Safety Institute.
• Available in smooth and cleated backing types.
• Custom sizes available.
• Email us your camera ready artwork for a free proof.

• Vinyl loop construction traps dirt and moisture while scraping debris from shoes.
• Thick vinyl foam backing helps keep the mat in place.
• Tracking of dirt and moisture is minimized, protecting your clean floors and carpets.
• Easy and inexpensive to maintain.
• Just shake, vacuum or rinse out.
• 3/8" thick.
• Custom lengths available.

• Super Scrape Impressions Logo Mats offer a superior printing surface for your company logo or Promotional message
• Multi-color images are created by molding a digitally printed polymeric material into durable Nitrile rubber
• These long-lasting logo mats perform beautifully in all types of environments
• The high-traction surface effectively removes and traps tough dirt, grime and water from shoes
• Photo-realistic images, print ready artwork, tones and shades are all produced with unparalleled detail and clarity. 150 standard color options available.  
• PMS color matching available with an upcharge.
• 3/16” thickness. 
• Resistant to oils and chemicals.
• Upload your artwork for free proof.